Measurement conditions
Reflected light measurement: d/8 (diffuse lighting, viewing angle 8°)Simultaneous measurement in SCI (specular component included) / SCE (specular component excluded) modes. Compliance with standards: CIE No. 15, GB/T 3978, GB 2893, GB/T 18833, ISO 7724/1, ISO 11664, DIN5033 Teil7, JIS Z8722 Stan C, ASTM E1164, ASTM-D1003-07Transmittance: d/0 (diffuse lighting, vertical reception)
Integrating sphere size
Φ15,2 cm
Spectral range
360-780 nm
Reflectance range
0-200%
0,01%
Light source
Pulsed xenon lamp + LED
UV measurement
Includes UV, shut-off filters: 400 nm, 420 nm, 460 nm
Measuring apertures
Reflectance: XLAV Φ25.4 mm / Φ30 mm; LAV Φ15 mm / Φ18 mm; MAV Φ8 mm / Φ11 mm; SAV Φ3 mm / Φ6 mm (Automatic recognition of the measurement aperture)
Transmittance: Φ17 mm / Φ25 mm
Transmission measurement specification
Sample size: height and width are not limited, thickness ≤50 mm
Repeatability*
ΔE*ab ≤ 0.01
Spectral reflectance / Transmittance: ≤0.1%
Inter-Instrument agreement**
XLAV ΔE*ab 0,1
Standard observer
2° and 10°
Illuminants
A, B, C, D50, D55, D65, D75, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, CWF, U30, U35, DLF, NBF, TL83, TL84, ID50, ID65, LED-B1, LED-B2, LED-B3, LED-B4, LED-B5, LED-BH1, LED-RGB1, LED-V1, LED-V2
Color spaces
CIE LAB, CIE LUV, LCh, Hunter Lab, Yxy, XYZ, Musell, s-RGB, βxy
Colorimetric indexes
WI (ASTM E313-20, ASTM E313-73, CIE, ISO 2470/R457, AATCC, Hunter, Taube, Berger Stensby), YI (ASTM D1925, ASTM E313-20, ASTM E313-73), Tint (ASTM E313-20), Isochromatic index Milm, Color Fastness, Color Changing Fastness, ISO brightness, R457, A density, T density, E density, M density, APHA/Hazen/Pt-Co (platinum-cobalt index), Gardner (Gardner Index), Saybolt (Saybolt Index), ASTM Color, Haze, Total Transmittance, Opacity
Color difference formulas
ΔE*ab, ΔE*CH, ΔE*uv, ΔE*cmc, ΔE*94, ΔE*00, ΔEab (Hunter), 555 color tone classification
Calibration
Automatic calibration, Automatic UV calibration
Brightness calibration
YES
Display
7-inch touchscreen
Data presented on the display
Spectral data, spectrogram, chromaticity data, chromaticity map, pass/fail assessment, color simulation, color assessment, haze, liquid chromaticity, color deviation
Camera
YES – Ultra HD (1,400 dpi)
Language
English, French, German, Spanish, Polish
Interface
RS-232, USB, USB-B, Bluetooth
Power source
DC regulated power supply
Operating temperature range
5°C to 40°C, relative humidity 80% or less at 35°C, without condensation
Storage temperature range
-20 to 45°C, relative humidity 80% or less at 35°C, without condensation
Accessories
Power supply, USB cable, transmission holder, 3Color® Color QC software for spectrophotometers, white, black and green calibration plates, complete set of measuring apertures: 30 mm, 18 mm, 11 mm, 6 mm, cuvette
Optional accessories
Transmission cuvette heater, tripod for vertical position, small samples holder, thread measurement holder, powder measurement holder, 40 x 40 cuvette holder for reflection port
*
After instrument calibration, the white correction plate was measured 30 times at 5-second intervals to measure the standard deviation result of the XLAV caliber.
**
Average measurement of 12 BCRA series plates based on a temperature of 23°C.
